Fujifilm shutter count (image counter)
Free · nothing is uploaded · numbers only for verified models
Reading…
What else is in this file
A Fuji shutter count on these bodies is an image counter in the RAF or JPEG, not a separate shutter log. That Fuji shutter count can reset after a firmware update, and the number this reader shows stops at 32,767. Drop an original file from the card.
Read this before you trust the number
- It is an image counter. Fujifilm does not store a separate shutter counter that ExifTool can read.
- It may reset to 0 after a firmware update, according to ExifTool. A low number on a camera that has been updated proves little.
- The maximum shown is 32,767, because ExifTool reads it as a 15-bit value.
For a used Fujifilm, the counter is one clue among several: the seller’s history, the firmware version, and the physical condition of the body.
Verified Fujifilm models (30)
Show the list (model names as the camera writes them)
GFX 50R, GFX 50S, GFX50S II, GFX100 II, GFX100RF, GFX100S II, X-E3, X-E4, X-E5, X-H1, X-H2, X-H2S, X-HF1, X-M5, X-Pro2, X-Pro3, X-S10, X-S20, X-T2, X-T3, X-T4, X-T5, X-T20, X-T30, X-T30 II, X-T30 III, X-T50, X100F, X100V, X100VI
Older X-series and FinePix models are not on the list; their files in our samples had no counter.
Where Fujifilm stores the counter
Fujifilm writes the counter into its maker notes as tag 0x1438, which ExifTool names ImageCount. The
tag is 16 bits wide; ExifTool ignores the top bit and keeps the lower 15 bits. ExifTool’s own note on the tag: “may
reset to 0 when new firmware is installed”.
Real readings from our test files
These public-domain RAFs were read by the tool on this page and by desktop ExifTool 13.59. Both gave the same numbers.
| Test file (CC0, raw.pixls.us) | Model | Reader result |
|---|---|---|
_AFXT2721.RAF | X-T3 | 3,851 |
DSCF0268.RAF | X-T4 | 241 |
DSCF0734.RAF | X100V | 734 |
The X100V file is DSCF0734 and its counter reads 734. A file number can be reset and the counter may reset after a firmware update, so neither proves how much the shutter was used.
Check it on a computer instead
With ExifTool installed: exiftool -ImageCount DSCF0001.RAF.
How we verified Fujifilm
33 Fujifilm sample files from 30 X and GFX models (JPEG and RAF) were read in the browser engine and with native ExifTool 13.59; every number matched.
Other bodies are listed on the camera shutter count checker.
Other brands
- Camera shutter count checker
- Nikon shutter count
- Sony shutter count
- Pentax and Ricoh shutter count checker
- Canon shutter count
Related tools
- View image metadata online lists GPS, camera, XMP and C2PA data in a photo.
- Remove metadata from product images cleans listing photos before you post them.
- Remove EXIF and GPS from a JPEG, PNG or WebP.
The reader runs ExifTool 13.59 by Phil Harvey (same terms as Perl: Artistic License or GPL) on zeroperl 1.0.10 (Apache-2.0), a WebAssembly build of Perl. Notices.
Shutter count questions
Is the Fujifilm number a real shutter count?
Not exactly. Fujifilm cameras store an image counter (ExifTool calls it ImageCount). ExifTool does not describe it as a shutter count, and notes that it may reset to 0 when new firmware is installed.
Can the counter go above 32,767?
ExifTool reads this counter as a 15-bit value, so the largest number it can show is 32,767. If a camera may have taken more frames than that, the number on screen does not tell you the full total.
Does it count electronic-shutter frames?
ExifTool’s notes do not say which shutter frames are included, so we do not claim either way. Comparing two recent photos taken a known number of frames apart shows how your body counts.
RAF or JPEG?
Either, as long as it is the original file from the card. Fujifilm RAF and JPEG files are both verified.
Is the file uploaded?
No. The RAF or JPEG is read in your browser.